Here’s the cabinet project. We’re building a cabinet to fit a specific space in a small bathroom. It needs to be angled to fit behind the door.
The rough cut birch plywood
Gluing up the frame and shelves. Pine front frame.
The back (and the doors) are bead board.
This is the first attempt at the shelf nosing. Too thick, so it got knocked off and replaced.
Gluing up the door frames – trying to keep them flat.
After inserting the door panels and mounting the hardware, done!
Oh, also built a plinth to raise it above the baseboards in the room.
Started around the first of December, 2017. Material costs about $110. Maybe 15 or 20 hours build time.